Ask a compliance question

ing activity will take appropriate reconciliation action through international channels, including departmental standardization offices, if required. 6.5 Disposal actions. Disposal of this product should be in accordance with local, state and Federal regulations. Care should be taken to avoid mixing used MIL-PRF-680 with other waste materials, especially those containing halogenated solvents. However, these solvents can be recycled instead of disposal. 6.6 Material Safety Data Sheets. Contracting officers will identify those activities requiring copies of completed Material Safety Data Sheets (MSDSs) prepared in accordance with FED-STD-313. The pertinent Government mailing addresses for submission of data are listed in FED-STD-313; and 29 CFR 1910.1200 requires that the MSDS for each hazar

n a cool, dry place, away from heat, flames, and oxidizing agents. NAVAIR 17-15-50.2 TM 38-301-2 T.O. 33-1-37-2 CGTO 33-1-37-2 HMWS-5 15 March 2021 HAZARDOUS MATERIALS WARNINGS (CONTINUED) - Index Material Warning 2 MIL-PRF-680, Degreasing Solvent MIL-PRF-680, PERFORMANCE SPECIFICATION: DEGREASING SOLVENT. This specification covers degreasing solvent that consists of four types of petroleum distillates. The different types are referred to as "Stoddard solvent", "141 degrees Fahrenheit (degrees F) (60.6 degrees Celsius (degrees C)) solvent", "200 degrees F (93.3 degrees C) solvent", and "141 degrees F d-limonene blended solvent". They are used for degreasing of machine parts in equipment maintenance. MIL-PRF-680, degreasing solvent is not classified as dangerous. Good general ventilation sh

6. REFERENCE/RELATED DOCUMENTS. 6.1 Referenced Documents. a. MIL-PRF-372, Cleaning Compound, Solvent (For Bore of Small Arms and Automatic Aircraft Weapons). b. MIL-PRF-680, Degreasing Solvent. c. MIL-PRF-2104, Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service. d. MIL-L-46000-C, Lubricant, Semi-Fluid (Automatic Weapons). Source: https://assist.dla.mil -- Downloaded: 2026-07-20T01:50Z Check the source to verify that this is the current version before use. MIL-STD-810H w/CHANGE 1 METHOD 504.3 504.3-10 e. MIL-PRF-32033, Notice 1, Lubricating Oil, General Purpose, Preservative (Water-Displacing, Low Temperature);. f. MIL-PRF-63460E, Amendment 3, Lubricant, Cleaner and Preservative for Weapons and Weapons Systems (Metric). g. ASTM D4814-13, Fuel, Automotive Spark-Ignition Eng

ion and fingerprint remover until they will pass the cleaning tests as specified in MIL-STD-2073-1E. Items are treated for fingerprint removal (figure 2-12 on page 2-14) by the following steps:  Wear safety goggles, rubber gloves, and apron. Immerse items in perspiration and fingerprint removal compound.  Agitate items for a minimum of 2 minutes. Cleaning and Drying 27 October 2015 TM 38-700 2-13  If item is too large for complete immersion, clean critical surfaces with a lint free clean cloth saturated in fingerprint remover.  After the petroleum base fingerprint remover (MIL-C-15074) is used, rinse items in a second tank containing clean solvent conforming to MIL-PRF-680, ASTM D 4081,(grade 1), MIL-PRF-680C or MIL-T-81533A, to remove the fingerprint residue.  Agitate items in rinse

Number ASTM D 5486, Type I Tape, pressure-sensitive, waterproof, 2 inches (50 (formerly PPP-T-60) mm) wide Class 1 Colored (Tan) 7510-00-079-7906 Class 2 Clear 7510-00-266-6715 MIL-PRF-121 Barrier, greaseproof, waterproof, flexible, 8135-00-233-3871 heat-sealable MIL-P-130 Paper, wrapping, laminated and creped Heavy duty 8135-00-664-0028 Medium duty 8135-00-680-2777 Light duty MIL-PRF-131 Barrier, water vapor proof, flexible, heat-sealable, Class 1 Plastic backing (general use) 8135-00-282-0565 Class 2 Kraft backing (for small packages under 10 8135-00-812-9023 lb and under 40 cu in volume) A-A-3174 Film, polyolefin, transparent, 0.0004 inch 8135-00-068-9466 (formerly L-P-378) (0.01016 mm) thick PPP-C-795 Film, cellular plastic, heat-sealable, 0.1875 inch 8135-00-142-9016 (4.763 mm) thick