CheckMyAFI Evidence pack
Download .md

Compliance evidence pack (unofficial)

Generated: 2026-07-21 13:35 UTC Catalog checked: 2026-07-12 Supplement layer: none selected Source: CheckMyAFI (https://checkmyafi.com)
Q: MIL-PRF-680
UNOFFICIAL REFERENCE — VERIFY BEFORE CITING. This pack quotes indexed copies of public publications. The certified PDF on e-Publishing (linked under every quote) is the only authoritative source. Your MAJCOM/unit supplement may add stricter requirements.

Synthesized answer (unofficial)

# MIL-PRF-680

MIL-PRF-680 is a performance specification for degreasing solvent [TO 33-1-37-2]. The specification covers four types of petroleum distillates: "Stoddard solvent," "141 degrees Fahrenheit solvent," "200 degrees F solvent," and "141 degrees F d-limonene blended solvent" [TO 33-1-37-2]. These solvents are used for degreasing machine parts in equipment maintenance [TO 33-1-37-2].

Disposal: Disposal must comply with local, state, and Federal regulations, with care taken to avoid mixing used MIL-PRF-680 with other waste materials, especially those containing halogenated solvents [MIL-PRF-680 para 6.5]. However, these solvents can be recycled instead of disposed [MIL-PRF-680 para 6.5].

Material Safety Data Sheets: Contracting officers must identify activities requiring completed MSDSs prepared per FED-STD-313 [MIL-PRF-680 para 6.6], and 29 CFR 1910.1200 requires MSDS submission for each hazardous material [MIL-PR

Unofficial — answered from indexed publication text, which may be incomplete or out of date. Your MAJCOM/unit supplement may be stricter. Verify the official PDF before acting or writing a finding.

Controlling Air Force guidance (quoted)

AFPAM 24-237 IP, p. 29 (effective/current as of 2022-01-20)

ion and fingerprint remover until they will pass the cleaning tests as specified in MIL-STD-2073-1E. Items are treated for fingerprint removal (figure 2-12 on page 2-14) by the following steps:  Wear safety goggles, rubber gloves, and apron. Immerse items in perspiration and fingerprint removal compound.  Agitate items for a minimum of 2 minutes. Cleaning and Drying 27 October 2015 TM 38-700 2-13  If item is too large for complete immersion, clean critical surfaces with a lint free clean cloth saturated in fingerprint remover.  After the petroleum base fingerprint remover (MIL-C-15074) is used, rinse items in a second tank containing clean solvent conforming to MIL-PRF-680, ASTM D 4081,(grade 1), MIL-PRF-680C or MIL-T-81533A, to remove the fingerprint residue.  Agitate items in rinse

Official source: https://static.e-publishing.af.mil/production/1/af_a4/publication/afpam24-237_ip/afpam24-237_ip.pdf View in PDF →

Supplement deltas

No supplement passage retrieved — check the supplement chain on the pub page before citing.

Federal / DoD standards implemented (quoted)

No federal/DoD passage retrieved.

Retrieval confidence: 88.88 · Generated by CheckMyAFI — an unofficial reference. Not an official Air Force product. Verify every citation against the certified publication.