Ask a compliance question

UFC 4-020-02FA 1 March 2005 UNIFIED FACILITIES CRITERIA (UFC) SECURITY ENGINEERING: CONCEPT DESIGN FOR OFFICIAL USE ONLY; THIS DOCUMENT IS NOT AVAILABLE ON THE INTERNET INACTIVE UFC 4-020-02FA 1 March 2005 1 UNIFIED FACILITIES CRITERIA (UFC) SECURITY ENGINEERING: CONCEPT DESIGN Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder. U.S. ARMY CORPS OF ENGINEERS (Preparing Activity) NAVAL FACILITIES ENGINEERING COMMAND AIR FORCE CIVIL ENGINEER SUPPORT AGENCY Record of Changes (changes are indicated by \1\ ... /1/) Change No. Date Location 1 25 May 2006 Revised Foreword INACTIVE UFC 4-020-02FA 1 March 2005 2 FOREWORD \1\ The Unified Facilities Criteria (UFC) system i

ngineer Naval Facilities Engineering Command ______________________________________ KATHLEEN I. FERGUSON, P.E. The Deputy Civil Engineer DCS/Installations & Logistics Department of the Air Force ______________________________________ Dr. GET W. MOY, P.E. Director, Installations Requirements and Management Office of the Deputy Under Secretary of Defense (Installations and Environment) INACTIVE UFC 4-020-02FA 1 March 2005 3 UNIFIED FACILITIES CRITERIA (UFC) SECURITY ENGINEERING: CONCEPT DESIGN This document is available For Official Use Only. A copy may be obtained, with proper justification, through the Protective Design Center . Correspondence and requests for Protective Design Center services. INACTIVE

water systems and plumbing systems are appropriately designed and constructed in accordance with Unified Facilities Criteria (UFC) 3-230-01, Water Storage and Distribution; UFC 3-230-03, Water Treatment; UFC 3-420-01, Plumbing Systems, UFC 4- 020-01, DoD Security Engineering Facilities Planning Manual; UFC 4-020-02FA, Security Engineering: Concept Design; UFC 4-020-03FA, Security Engineering: Final Design; and DAFMAN 32-1067, Water and Fuel Systems. 2.4.3. Ensure compliance with applicable drinking water regulatory requirements or standards in coordination with Bioenvironmental Engineering personnel. 2.4.4. Provide engineering studies, design of water distribution systems and treatment plants, and associated system components. 2.4.5. Ensure an effective backflow prevention and cross-connec

ment: A How-To Guide to Mitigate Potential Terrorist Attacks Against Buildings and Unified Facilities Criteria publications UFC 4-020-01, DOD Security Engineering Facilities Planning Manual, UFC 4-020-02FA, Security Engineering Concept Design, UFC 4-020-03FA, Security Engineering Final Design, and UFC 4-021- 02, Electronic Security Systems, for additional information on security engineering. Note. U.S. Department of Homeland Security (DHS) critical infrastructure VAs are voluntary, nonregulatory VAs but are another tool for the prevent and protect phases. <https://www.cisa.gov/critical-infrastructure-vulnerability-assessments>. THREAT/HAZARD ASSESSMENT 2-26. Installations perform threat/hazard assessments in coordination with the assessments performed for antiterrorism (AT) and the Defense

their proper use.(T-0) Once trained, individual workers and the environment must be protected. Workers are personally responsible for following safety procedures. (T-0) DAFMAN32-1067 1 JULY 2025 19 Chapter 4 DRINKING WATER SYSTEMS 4.1. Water Facility Design. Design drinking water systems in accordance with UFC 3-230-01, Water Storage and Distribution; UFC 3-230-03, Water Treatment; UFC 3-420-01, Plumbing Systems; UFC 4-020-01, DoD Security Engineering Facilities Planning Manual; UFC 4-020- 02FA, Security Engineering: Concept Design (CUI); and UFC 4-020-03FA, Security Engineering: Final Design (CUI). 4.2. Facility Operation and Maintenance. 4.2.1. Water Treatment and Distribution Systems. Installations must operate and maintain water treatment and distribution facilities according to this D

Manual. UFC 4-020-02FA, Security Engineering: Concept Design, provides interdisciplinary design guidance for developing preliminary systems of protective measures to implement the design criteria established using UFC 4-020-01. Those protective measures include building and site elements, equipment, and the supporting manpower and procedures necessary to make them all work as a system. UFC 4-020-02FA is in the process of becoming a joint document. For the purpose and implementation of this UFC, UFC 4-020-02FA applies towards all three services regardless of the “FA” suffix. UFC 4-020-02FA contains sufficient detail to support concept-level project development, and as such can provide a good basis for a more detailed design. The UFC also provides a process for assessing the impact of protec

st Data”, 61st Edition, 2003, https://www.rsmeansonline.com/. PDC-TR90-2, BIRM 3D – Barrier Impact Response Model 3 Dimension SD-STD-02.1, Specification for Vehicle Crash Test of Perimeter Barriers and Gates UFC 4-010-01, DoD Minimum Antiterrorism Standards for Buildings, Tri-Service Engineering Senior Executive Panel, https://www.wbdg.org/dod/ufc/ufc-4-010-01 UFC 4-020-01, DoD Security Engineering Facilities Planning Manual, Tri-Service Engineering Senior Executive Panel, https://www.wbdg.org/dod/ufc/ufc-4-020-01 nopeUFC 4-020-02FA, Security Engineering: Concept Design (FOUO), Tri-Service Engineering Senior Executive Panel, https://www.wbdg.org/dod/ufc/ufc-4-020-02fa UFC 4-022-01, Security Engineering: Entry Control Facilities/Access Control Points, Tri-Service Engineering Senior Executiv

will meet the requirements of the design criteria. The manual also addresses the tradeoffs between cost and risk. The Security Engineering Facilities Planning Manual is intended to be used by planners as well as security and antiterrorism personnel with support from planning team members. 1-21.3 Security Engineering Facilities Design Manual. UFC 4-020-02FA provides interdisciplinary design guidance for developing preliminary systems of protective measures to implement the design criteria established using UFC 4-020-01. Those protective measures include building and site elements, equipment, and the supporting manpower and procedures necessary to make them all work as a system. The information in UFC 4-020-02FA is in sufficient detail to support concept level project development, and as suc