Ask a compliance question

UFC 4-010-01 12 December 2018 Change 3, 24 May 2024 UNIFIED FACILITIES CRITERIA (UFC) APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED DoD MINIMUM ANTITERRORISM STANDARDS FOR BUILDINGS CANCELLED UFC 4-010-01 12 December 2018 Change 3, 24 May 2024 This Page Intentionally Left Blank CANCELLED UFC 4-010-01 12 December 2018 Change 3, 24 May 2024 UNIFIED FACILITIES CRITERIA (UFC) DoD MINIMUM ANTITERRORISM STANDARDS FOR BUILDINGS Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder. Indicate the preparing activity beside the Service responsible for preparing the document. U.S. ARMY CORPS OF ENGINEERS (Preparing Activity) NAVAL FACILITIES ENGINEERING COMMAND AIR FORC

ry and relocatable buildings to be consistent with DoDI 4165.56; and incorporated all current CCRs from the field. This UFC supersedes UFC 4-010-01, DoD Minimum Antiterrorism Standards for Buildings, dated 9 February 2012. CANCELLED UFC 4-010-01 12 December 2018 Change 3, 24 May 2024 This Page Intentionally Left Blank CANCELLED UFC 4-010-01 12 December 2018 Change 3, 24 May 2024 FOREWORD The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense Agencies, and the DoD Field Activities in accordance with USD (AT&L) Memorandum dated 29 May 2002. UFC will be used for all DoD projects and work for other customers where appropriat

zards for the various levels of protection are described in Table B-1. Note that regardless of standoff distance, where buildings are three stories or more, the progressive collapse provisions of Standard 6 should be applied. CANCELLED UFC 4-010-01 12 December 2018 Change 3, 24 May 2024 41 Figure B-1 Standoff Distances – With Controlled Perimeter Figure B-2 Standoff Distances – No Controlled Perimeter CANCELLED UFC 4-010-01 12 December 2018 Change 3, 24 May 2024 42 Figure B-3 Parking and Roadway Control for Existing Buildings – Controlled Perimeter Figure B-4 Parking and Roadway Control for Existing Buildings – No Controlled Perimeter CANCELLED UFC 4-010-01 12 December 2018 Change 3, 24 May 2024 43 B-2.1.2 Conventional Construction Standoff Distance. Standoff distances for buildings vary b

losive weights (kg/pounds of TNT) associated with designations – I and II. UFC 4-010-02 is For Official Use Only (FOUO) (3) For existing buildings, see UFC 4-010-01, paragraph B-1.1.2.2 for additional options. (4) For existing family housing, see UFC 4-010-01, paragraph B-1.1.2.2.3 for additional options. Source: UFC 4-010-01 3.2.6. Dispersed Facilities. Facility orientation is generally by rows and columns as shown in Figure 3.6. However in high-threat areas, facilities are usually hardened, dispersed, or both. If facilities are staggered or sited in irregular locations to maximize passive defense, ensure dispersed locations are within the limitations of the utility systems. The same principle applies to the different area locations. Use extreme caution when staggering facilities to AFPAM

res. Security and AT are primary considerations in the planning and programming of Air Force facilities, which should include independent review and consultation with installation security and AT personnel. UFC 4-010- 01, DoD Minimum Antiterrorism Standards for Buildings, is the official AT minimum design standard for DoD facilities. If the total of any work classified as repair (renovations, modifications, revitalizations, and restorations, etc.), regardless of fund source, exceeds 50% of the current estimated cost of a military construction project to replace the facility or results in a change of occupancy level of the facility (as defined in UFC 4-010-01), programmers must ensure the entire facility is brought into compliance with UFC 4-010-01. (T-0) The cost of the military constructi

UFC 4-141-03 09 December 2024 13 Grade 2 Grade 3 Grade 4 Administrative Offices Physically separate from other areas of data center Required Required Required Fire separation from other areas of data center IAW UFC 1-200-01 IAW UFC 1-200-01 IAW UFC 1-200- 01 Security Office Physically separate from other areas of data center Not Required Required Required Fire separation from other areas of data center IAW UFC 1-200-01 IAW UFC 1-200-01 IAW UFC 1-200- 01 180-degree peepholes on security equipment and monitoring rooms IAW UFC 4-010-05 & 4-020-01 IAW UFC 4-010-05 & 4-020-01 IAW UFC 4-010- 05 & 4-020-01 Dedicated and hardened security equipment and monitoring room with 16 mm (5/8 in) plywood-lined walls and solid core door IAW UFC 4-010-05 & 4-020-01 IAW UFC 4-010-05 & 4-020-01 IAW UFC 4-010-

s UFC 3-600-01, Fire Protection Engineering for Facilities UFC 4-010-01, DoD Minimum Antiterrorism Standards for Buildings UFC 4-021-02 28 July 2025 207 UFC 4-010-03, Security Engineering: Physical Security Measures for High-Risk Personnel UFC 4-010-05, SCIF/SAPF Planning, Design, and Construction UFC 4-010-06, Cybersecurity of Facility-Related Control Systems (FRCS) UFC 4-020-01, DoD Security Engineering Facilities Planning Manual UFC 4-020-02FA, Security Engineering: Concept Design UFC 4-020-03FA, Security Engineering: Final Design UFC 4-022-01, Security Engineering: Entry Control Facilities/Access Control Points UFC 4-022-03, Security Fences and Gates UFC 4-024-01, Security Engineering: Procedures for Designing Airborne Chemical, Biological, and Radiological Protection for Buildings UFC

stribution Pipelines UFC 3-460-01, Design: Petroleum Fuel Facilities UFC 3-490-06, Elevators UFC 3-501-01, Electrical Engineering UFC 3-520-01, Interior Electrical Systems UFC 3-530-01, Interior and Exterior Lighting Systems and Controls UFC 3-540-01, Engine-Driven Generator Systems for Prime and Standby Power Applications UFC 3-550-01, Exterior Electrical Power Distribution UFC 3-560-01, Operation and Maintenance: Electrical Safety UFC 3-570-01, Cathodic Protection UFC 3-580-01, Telecommunications Interior Infrastructure Planning and Design UFC 3-600-01, Fire Protection Engineering for Facilities UFC 3-701-01, DoD Facilities Pricing Guide UFC 4-010-01, DoD Minimum Antiterrorism Standards for Buildings \3\ UFC 4-010-05, SCIF/SAPF Planning, Design, and Construction /3/ UFC 4-010-06, Cyberse