Ask a compliance question

UFC 3-240-10A 16 January 2004 UNIFIED FACILITIES CRITERIA (UFC) SANITARY LANDFILL APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED INACTIVE UFC 3-240-10A 16 January 2004 1 UNIFIED FACILITIES CRITERIA (UFC) SANITARY LANDFILL Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder. U.S. ARMY CORPS OF ENGINEERS (Preparing Activity) NAVAL FACILITIES ENGINEERING COMMAND AIR FORCE CIVIL ENGINEER SUPPORT AGENCY Record of Changes (changes are indicated by \1\ ... /1/) Change No. Date Location This UFC supersedes TM 5-814-5, dated 15 January 1994. The format of this UFC does not conform to UFC 1-300-01; however, the format will be adjusted to conform at the next revision.

1-300-01; however, the format will be adjusted to conform at the next revision. The body of this UFC is the previous TM 5-814-5, dated 15 January 1994. INACTIVE UFC 3-240-10A 16 January 2004 2 FOREWORD \1\ The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense Agencies, and the DoD Field Activities in accordance with USD(AT&L) Memorandum dated 29 May 2002. UFC will be used for all DoD projects and work for other customers where appropriate. All construction outside of the United States is also governed by Status of forces Agreements (SOFA), Host Nation Funded Construction Agreements (HNFA), and in some instances, Bilate

sposal AFH 10-222V4 Environmental Considerations for Overseas Contingency Operations DODI 4715.19 Use of Open-Air Burn Pits in Contingency Operations DODI 4715.22 Environmental Management Policy for Contingency Locations UFC 3-240-10A Sanitary Landfills WARREN D. BERRY, Lieutenant General, USAF DCS/Logistics, Engineering and Force ProtectionAFTTP 3-32.33 V1, 26 October 2018 133 Attachment 1

e. Design must consider the effects of changing barometric pressures. Design the cover to prevent air intrusion into the waste to prevent oxygen overpull. Refer to UFC 3-240-10A (for Army) for final cover UFC 3-540-08 23 January 2017 79 design. For other Agencies, use UFC 3-240-05A as a reference and comply with Agency specific guidance. 6-3.1.4 Landfill Liner Design. Refer to UFC 3-240-10A (for Army), for landfill liners design. For other Agencies, use UFC 3-240-05A as a reference and comply with Agency specific guidance. 6-3.1.5 Moisture Addition and Leachate Recirculation. Introduce moisture to landfill or recirculate leachate as required to optimize LFG production by accelerating decomposition and to remove water soluble contaminants in the waste. Contaminants in the landfill can be re

Init Init 17.3. Passive defense measures/splinter protection construction: TR: TO 35E4-170-2, AFPAM 10-219 17.3.1. Primary revetment materials 17.3.2. Expedient revetment materials 17.3.3. Construct kit-type revetments: 17.3.3.1. A-1 17.3.3.2. B-1 17.3.3.3. Expandable bin type revetment 17.3.3.4. Pre-cast modular concrete 17.4. Expedient field construction: 17.4.1. Sanitary landfill TR: UFC 3-240- 10A 17.4.2. Berms and dikes: 17.4.2.1. Construct berm 17.4.2.2. Ammunition pads 17.4.2.3. Construct dike 17.4.2.4. Fuel bladders 17.4.2.5. Maintain 17.4.3. Waste water disposal TR: UFC 3- 240-02: 17.4.3.1. Oxidation lagoon 17.4.3.2. Evaporation lagoon 17.4.3.3. Storm water control 17.4.4. Roadwork: 17.4.4.1. Drainage structures 17.4.4.2. Soil cement road 17.5. Expedient bed down methods: 17.5.1.

aps 9.6. Solid Waste Disposal. Solid waste must also be collected and disposed. For planning purposes, expect four pounds per person per day of solid waste will be generated. This includes garbage (waste from preparation and serving of food), rubbish (paper, cartons, boxes, cans, etc.), ashes and industrial wastes. Although it is important to consider all available methods of solid waste disposal, disposal plans must adhere to theater-specific waste management guidance and procedures. Other sources of information include AFI 32-7001, Environmental Management, AFI 32-7042, Waste Management, UFC 3-240-10A, Sanitary Landfill, and AFH 10-222, Volume 4. These publications provide good solid waste management guidelines, however engineer planners must be aware of local, theater, and host-nation r

verwhelming task. The goal is to dispose of solid waste in an environmentally acceptable manner consistent with good sanitary engineering principles and still accomplish the unit mission. There are many information sources pertaining to solid waste disposal in a deployed environment, and a few general principles are addressed in this chapter. AFI 32- 7001, Environmental Management, AFI 32-7042, Waste Management, UFC 3- 240-10A, Sanitary Landfill, and AFH 10-222, Volume 4, all provide good solid waste management principles, however, engineers should follow local and theater-specific waste management guidance and procedures. 10.2. Basic Guidelines. Disposal of solid waste is dependent on the location and surrounding environment. Some bases use host-nation contractors to dispose of solid wast