Ask a compliance question

UFC 1-200-01 01 September 2022 Change 4, 17 December 2024 UNIFIED FACILITIES CRITERIA (UFC) APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED DOD BUILDING CODE CANCELLED UFC 1-200-01 01 September 2022 Change 4, 17 December 2024 This Page Intentionally Left Blank CANCELLED UFC 1-200-01 01 September 2022 Change 4, 17 December 2024 UNIFIED FACILITIES CRITERIA (UFC) DOD BUILDING CODE Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder. Indicate the Military Department Preparing Activity responsible for the document. U.S. ARMY CORPS OF ENGINEERS NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND (Preparing Activity) AIR FORCE CIVIL ENGINEER CENTER Record of Changes (chan

ion paragraphs. This UFC supersedes UFC 1-200-01, dated 01 October 2020. CANCELLED UFC 1-200-01 01 September 2022 Change 4, 17 December 2024 This Page Intentionally Left Blank CANCELLED UFC 1-200-01 01 September 2022 Change 4, 17 December 2024 FOREWORD The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense Agencies, and the DoD Field Activities in accordance with USD (AT&L) Memorandum dated 29 May 2002. UFC will be used for all DoD projects and work for other customers where appropriate. All construction outside of the United States, its territories, and possessions is also governed by Status of Forces Agreements (SOFA),

nterior Design UFC 3-190-06, Protective Coatings and Paints UFC 3-201-01, Civil Engineering UFC 3-201-02, Landscape Architecture UFC 3-210-10, Low Impact Development UFC 3-220-01, Geotechnical Engineering UFC 3-230-01, Water Storage and Distribution UFC 3-230-03, Water Treatment UFC 3-240-01, Wastewater Collection and Treatment UFC 3-301-01, Structural Engineering UFC 3-301-02, Design of Risk Category V Structures, National Strategic Military Assets UFC 3-401-01, Mechanical Engineering UFC 3-410-01, Heating, Ventilating, and Air Conditioning Systems CANCELLED UFC 1-200-01 01 September 2022 Change 4, 17 December 2024 71 UFC 3-420-01, Plumbing Systems UFC 3-430-05, Natural Gas and Liquefied Petroleum Gas (LPG) Distribution Pipelines UFC 3-460-01, Design: Petroleum Fuel Facilities UFC 3-490-0

I construction. IAW UFC 1-200-01. Minimum Type II construction. Structural frame IAW UFC 1-200- 01. Minimum Type II construction. IAW UFC 1-200-01. Minimum Type II construction. IAW UFC 1-200-01. Minimum Type II construction. Interior non- computer room partition walls IAW UFC 1-200- 01. Minimum Type II construction. IAW UFC 1-200-01. Minimum Type II construction. IAW UFC 1-200-01. Minimum Type II construction. Interior computer room partition walls 2 hour minimum 2 hour minimum 2 hour minimum Shaft enclosures IAW UFC 1-200- 01. IAW UFC 1-200-01. IAW UFC 1-200-01. Floors and floor- ceilings IAW UFC 1-200- 01. Minimum Type II construction. IAW UFC 1-200-01. Minimum Type II construction. IAW UFC 1-200-01. Minimum Type II construction. Roofs and roof- ceilings IAW UFC 1-200- 01. Minimum Type

in Attachment 2. SSCMAN91-710V5 27 DECEMBER 2022 11 Chapter 4 CONVENTIONAL FACILITIES AND STRUCTURES 4.1. Design Standards. 4.1.1. The design of new, rehabilitated, or modified conventional facilities and structures on the ranges shall comply with the requirements of MIL-STD-3007, UFC 1-200-01, DoD Building Code (General Building Requirements), and the specifications, standards, codes, and practices of the documents cited in this volume to the extent stated in the text. 4.1.2. Concrete structures shall be IAW UFC 1-200-01 and applicable American Concrete Institute (ACI) codes and standards. 4.1.3. Masonry construction shall be IAW UFC 1-200-01. 4.1.4. Timber construction shall be IAW UFC 1-200-01, Deutsches Institut Für Normung (DIN) [German Institute for Standardisation] EN 1995-1-1, Eur

3-401-01, Mechanical Engineering, 01 July 2013, and all subsequent changes. 1-2 PURPOSE AND SCOPE. This UFC provides requirements and guidance for mechanical systems designed and constructed for the Department of Defense (DoD). Figure 1-1 shows the relationship of this UFC to other related mechanical UFCs. 1-3 APPLICABILITY. This UFC follows the same applicability as UFC 1-200-01, paragraph 1-3, with no exceptions. 1-4 GENERAL BUILDING REQUIREMENTS. Comply with UFC 1-200-01. UFC 1-200-01 provides applicability of model building codes and government unique criteria for typical design disciplines and building systems, as well as for accessibility, antiterrorism, security, high performance and sustainability requirements, and safety. Use this UFC in addition to UFC 1-200-01 and the UFCs and g

pril 2025 2 1-4 GENERAL BUILDING REQUIREMENTS. Comply with UFC 1-200-01, DoD Building Code and UFC 1-200-02 High Performance and Sustainable Building Requirements. Use 1-200-02 in conjunction with UFC 1-200- 01 and the UFC and government criteria referenced therein. UFC 1-200-01 provides applicability of model building codes and government unique criteria for typical design disciplines and building systems, as well as for accessibility, antiterrorism, physical security, cybersecurity, high performance and sustainability requirements, and safety. UFC 1-200-02 provides minimum unified requirements and coordinating guidance for planning, designing, constructing, renovating, and maintaining high performance and sustainable facilities that will enhance DOD mission capability by reducing total o

BILITY. This UFC follows the same applicability as UFC 1-200-01, paragraph 1-3, with no exceptions. 1-5 GENERAL BUILDING REQUIREMENTS. Comply with UFC 1-200-01, DoD Building Code. UFC 1-200-01 provides applicability of model building codes and government unique criteria for typical design disciplines and building systems, as well as for accessibility, antiterrorism, security, high performance and sustainability requirements, and safety. Use this UFC in addition to UFC 1-200-01 and the UFCs and government criteria referenced therein. 1-6 CYBERSECURITY. All facility-related control systems (including systems separate from a utility monitoring and control system) must be planned, designed, acquired, executed, and maintained in accordance with UFC 4-010-06, and as required by individual Servic