Ask a compliance question

AMSC N/A FSC 91GP DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. i INCH-POUND MIL-STD-161J 23 July 2025 SUPERSEDING MIL-STD-161H 04 September 2015 DEPARTMENT OF DEFENSE STANDARD PRACTICE IDENTIFICATION METHODS FOR BULK PETROLEUM PRODUCTS SYSTEMS INCLUDING HYDROCARBON MISSILE FUELS Source: https://assist.dla.mil -- Downloaded: 2026-07-20T01:55Z Check the source to verify that this is the current version before use. MIL-STD-161J ii FOREWORD 1. This standard is approved for use by all Departments and Agencies of the Department of Defense (DoD). 2. Comments, suggestions, or questions on this document should be addressed to AFPET/PTQ, 2430 C Street, Building 70, Area B, Wright-Patterson AFB OH 45433 or e-mailed to AFPET.PTMT@us.af.mil. Since contact informatio

ssist.dla.mil -- Downloaded: 2026-07-20T01:55Z Check the source to verify that this is the current version before use. MIL-STD-161J 1 1. SCOPE 1.1 Scope. This standard provides a uniform method for the identification of liquid petroleum products and hydrocarbon missile fuels, rocket grade kerosene propellant, stored in and dispensed from Government-owned or operated storage facilities. The employment of this standard promotes greater safety to personnel and reduces the potential for error, confusion, and inaction in times of emergency by providing uniformity in the identification of products and product groups. 1.1.1 Mixing. The mixing of different grades and types of petroleum products and hydrocarbon missile fuels in field operations can be disastrous to the operation of aircraft, ships,

ll those characteristics meet anticipated needs. Thus, it is most expedient to use MIL-STD-461E as the basic reference for establishing EMI requirements as shown in Figure E-1. The procedure then deviates, depending on whether the equipment is a military type or CI. If the latter, a complex evaluation process should be initiated. Guidance for such an evaluation is the subject of the EPS report. Source: https://assist.dla.mil -- Downloaded: 2026-07-20T01:47Z Check the source to verify that this is the current version before use. MIL-HDBK-237D 161 FIGURE E-1. Defining Applicable EMI Requirements. Specify Mission Define performance characteristics taking into account mission and safety criticality Determine operational EME Are requirements in MIL-STD 461 appropriate? Can MIL-STD 461 requireme

. . . . . . . . . . . . .38 Use of the attribute applicPropertyValues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Use of the attribute autoPlay (JS-106) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Use of the attribute id for destination elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 MIL-STD-3048C(USAF) 161 Source: https://assist.dla.mil -- Downloaded: 2026-07-20T01:53Z Check the source to verify that this is the current version before use. Use of the attribute updateHighlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Use of the attribute updateReasonType. . . . . . . . . . . . . . . . . .

STD-161, DoD Standard Practice: Identification Methods for Bulk Petroleum Products Systems Including Hydrocarbon Missile Fuels, and 29 CFR § 1910, Subpart J – General Environment Controls. Note: Follow MIL- STD-101C for agents not identified in ASME A13.1. 17.7.4. MIL-STD-101C contains detailed requirements for piping systems. Labels and paint will flake off pipes carrying cryogens (typically liquid oxygen and nitrogen). Metal signs with identification markings will be attached above or hung below cryogen piping by metal bands. (T-0) DAFMAN91-203 24 FEBRUARY 2026 187 Chapter 18 HYRDROCARBON FUELS 18.1. Scope. This chapter covers the hazards, applications, and safety protocols associated with hydrocarbon fuels. 18.1.1. Hydrocarbon fuels consist of aviation fuels, rocket propellants, diesel

isting. . Design requirements Laser Laser acquisition Laser design Laser eye protection Laser facility design Laser safety Laser safety design Laser support equipment Laser systems Maintenance Military lasers Protective equipment 6.3 Changes from previous issue. Asterisks or vert in this revision to identify changes with respect to the the extensiveness of the changes. cal lines are not used previous issue due to Source: https://assist.dla.mil -- Downloaded: 2026-07-20T01:55Z Check the source to verify that this is the current version before use. MIL-STD-1425A APPENDIX A LASER FACILITY DESIGN A.1 Introduction. Design requirements for laser facilities shall follow requirements given in specific component laser standards, e.g., AFOSH Std 161-10. Where specific component standards do not exit

e radiation system to the closest metallic ground in 5.22.3.3b(5). Source: https://assist.dla.mil -- Downloaded: 2026-07-20T01:49Z Check the source to verify that this is the current version before use. MIL-STD-461H 161 RS105 FIGURE RS105- 1. RS105 limit for all applications. 0 10000 20000 30000 40000 50000 60000 0 10 20 30 40 50 60 70 80 90 100 Time (Nanoseconds) Field strength (V/m) E1(t) = 0 when t < 0 = E01 x k1 ( ) when t > 0 E01 = 5 x 104 V/m a1 = 4 x 107 s-1 b1 = 6 x 108 s-1 k1 = 1.3 t b t a e e 1 1 − − − Source: https://assist.dla.mil -- Downloaded: 2026-07-20T01:49Z Check the source to verify that this is the current version before use. MIL-STD-461H 162 RS105 FIGURE RS105- 2. Typical calibration setup using parallel plate radiation system. Less than 0.5 dB loss at 200 MHz Source:

l: (T-2). 4.3.3.1. Layout for all piping and facilities of liquid fuels systems. 4.3.3.2. Base disaster preparedness layout with associated cordon plotter. 4.3.3.3. Flightline layout as it applies hydrant systems and outlets. 4.3.4. Provides detailed schematics and coordinates with FMT for operating checklists on each fuel system. (T-2). 4.3.5. Provides certified base pipeline inventories for each pipeline, and each fuel tank on installation and coordinates with FMT to meet requirements per UFC 3-460-01 and DLA-E P- 1, Recording and Processing Inventory Transactions. (T-1). 4.3.6. Paints, marks, and color codes permanently installed fuel facilities to comply with current MIL-STD-101, Color Code for Pipelines and for Compressed Gas Cylinders, current MIL-STD-161, Identification Methods for