UFC 4-229-01N is a Unified Facilities Criteria (UFC) document current as of 16 January 2004, titled "Design: General Maintenance Facilities." [UFC 4-229-01N] It is designated INACTIVE. [UFC 4-229-01N]
The document was prepared by the U.S. Army Corps of Engineers and Naval Facilities Engineering Command, with Air Force Civil Engineering Support Agency involvement. [UFC 4-229-01N]
Key requirements include: All DoD facilities must comply with UFC 4-010-01 (Design: DoD Minimum Antiterrorism Standards for Buildings), and if any conflict occurs between UFC 4-229-01N and UFC 4-010-01, the antiterrorism standards take precedence. [UFC 4-229-01N para 1-2.4]
This UFC provides design criteria for general maintenance facilities and is referenced by other standards such as FC 2-000-05N for weapons maintenance facility design. [FC 2-000-05N]
Unofficial — answered from indexed publication text, which may be incomplete or out of date. Your MAJCOM/unit supplement may be stricter. Verify the official PDF before acting or writing a finding.
AFSOCI 32-1084 para 7.4.37 (effective/current as of 2023-02-21)tant drains. Applicable criteria include UFC 3-401-01 for mechanical & UFC 3-410-01 for HVAC. Electrical Industrial equipment typically requires 240- and 480-volt, three-phase electrical current. Use commercial grade convenience receptacles and special power outlets. Consult X-ray and other NDI equipment specifications for their specific power requirements. Applicable criteria include UFC 3-501-01 for general electrical requirements, UFC 3-520-01 for interior electrical systems requirements, UFC 3-530-01 for interior and exterior lighting and controls requirements, UFC 3-550-01 for exterior power distribution systems requirements, UFC 3-560-01 for electrical safety and electrical O&M requirements, UFC 3-580-01 for building telecommunications requirements, and UFC 4-021-01 for mass notifica
No supplement passage retrieved — check the supplement chain on the pub page before citing.
No federal/DoD passage retrieved.