# Compliance evidence pack (UNOFFICIAL)

- **Question:** UFS 4-023-07
- **Generated:** 2026-07-21 20:09 UTC
- **e-Publishing catalog checked:** 2026-07-12
- **Supplement layer:** none selected
- **Source:** CheckMyAFI (https://checkmyafi.com) — unofficial reference

> **UNOFFICIAL — VERIFY BEFORE CITING.** Quotes come from indexed copies of public publications. The certified PDF on e-Publishing is the only authoritative source. Your MAJCOM/unit supplement may be stricter.

## Controlling Air Force guidance (quoted)

**AFPAM 10-219V2 para 5.6.9, p. 59** (effective/current as of 2021-02-22)

> position should detonate incoming contact-fuzed munitions. These screens supplement the protection inherent in the protected structure or position and reduce structure damage. The screen may be wood, sheet steel, fencing, metal mesh, and other acceptable materials. It may be solid material or open screen. Use open screens (e.g., chain link fence or metal mesh) when observation through the screen is required. For information on constructing and siting predetonation screens, refer to GTA 90- 01-011 and UFC 4-023-07. Note: Predetonation layers may provide overhead protection for expeditionary and temporary structures when incorporated with adequate shielding layers. 5.6.9. Unconventional Hardening. In extreme, time-critical situations, previously discussed hardening methods may not be suitabl

Official source: https://static.e-publishing.af.mil/production/1/af_a4/publication/afpam10-219v2/afpam10-219v2.pdf

**AFH 10-222 Volume 14 para 2.1** (effective/current as of 2008-08-01)

> otification Systems UFC 4-021-02 Security Engineering: Electronic Security Systems UFC 4-022-01 Entry Control Facilities/Access Control Points UFC 4-022-02 Design and Selection of Vehicle Barriers UFC 4-022-03/ Design of Security Fencing, Gates, Barriers, and MIL-HDBK-1013/10 Guard Facilities UFC 4-023-03 Design of Buildings to Resist Progressive Collapse UFC 4-023-04 Design of Windows to Resist Blast, Ballistics, and Forced Entry UFC 4-023-07 Design to Resist Direct Fire Weapons Effects UFC 4-026-01 Design to Resist Forced Entry UFC 4-027-01 Design of Deployed Operational Bases to Mitigate Terrorist AttacksAFH 10-222 Volume 14 1 August 2008 21 Chapter 2 FIGHTING POSITIONS 2.1. Overview. Fighting positions are fortified structures used for protection against hostile fire. They can also be

Official source: https://static.e-publishing.af.mil/production/1/publication/afh10-222v14/afh10-222v14.pdf

## Supplement deltas

_No supplement passage retrieved — check the supplement chain before citing._

## Federal / DoD standards implemented (quoted)

_No federal/DoD passage retrieved._

---
Retrieval confidence: 100.0 · CheckMyAFI is not an official Air Force product. Verify every citation against the certified publication.